Atlas Track Planning Software

HomeOnline Help & FAQ2D Editor

How to use the Toolbox?

The Toolbox in ATPS is a small helper window, which can stay open and always on top, intended to help creation, manipulation and precise placement of the different elements on the drawing plot. Use "Tools" > "Toolbox" menu to activate the Toolbox and then select a tool from the drop-down list inside. A short description of the different functions is following below.


Start point

Intended for precise positioning of the start point. Enter the coordinates in X and Y fields, direction angle in A field and press "Place" button.


Baseboard (rectangular)

Intended to create a baseboard with rectangular shape. Enter lengths of the sides in A and B fields and press "Done" button.


Baseboard (abs. coordinates)

Intended to create a baseboard in any shape by entering of the absolute coordinates of the sides. Enter the first coordinate in X and Y fields and press the green [+] button. Enter remaining coordinates in the same way (the baseboard shape will be updated after each press of [+] button) and press "Done" when ready. If you enter some wrong value, delete it by pressing red [-] button. Example


Baseboard (displacements)

Intended to create a baseboard in any shape by entering of the relative coordinates of the sides. In this case, the first coordinate is absolute starting point and every next coordinate is relative offset toward previous by dx (horizontal) and dy (vertical) values. Enter the initial (absolute) point in dx and dy fields and press green [+] button. Enter remaining coordinate offsets in the same way (the baseboard shape will be updated after each press of [+] button) and press "Done" when ready. If you enter some wrong value, delete it by pressing red [-] button. Example


Flex-tracks modelling

Intended for precise shaping of flex-tracks by entering the parameters of each section. The modelling of the sections can be performed both with mouse and from the Toolbox. Start with selection and placement of the flex-track from the tracks selection panel. The flex-track will follow the cursor, while you are moving the mouse on the drawing plot – don’t worry about this. To add a straight section, enter desired length in L field and press "+ Straight" button. To add a curved section, enter desired radius in R field and curvature angle in A field, then press "+ Curve" button. If the radius you entered is smaller than minimal for the given flex-track, the section will be added with the minimal possible radius. Positive angle gives right curve, while negative is used for left curve from the current direction. If the last added section is not suitable, you can delete it by pressing of the small red [-] button. When flex-track shape is ready, press "Fix" button. If the last added section is longer than remaining flex-track length, the track will be fixed automatically.


Height shift

Intended for vertical transposition (changing of track heights and object vertical positions) of the selected items. Enter the required height offset in dh field and use “Increase” or “Decrease” button to raise or lower all selected tracks and objects together. If “Skip objects at Vertical position = 0” option is checked, the selected objects (but not figures) with Vertical position parameter set to 0 (zero) will remain at base level. Objects like trees, signals and lamps with Vertical position parameter set to 0 (zero) are adjusted automatically in height, so they will follow the terrain shape in 3D viewing mode.


See also

How to set direction angle of the start point?
How to create baseboard/workbench shape?
How to work with flex-tracks?
How to work with figures in ATPS?

◄ Home  |  ▲ Top  |  


© 2010-2017 by Milen Peev a.k.a. Mixy. All rights reserved.
Use at your own risk according to our Terms of Use and Privacy Policy.
All mentioned brands and product names are trademarks of their respective owners.